Pave-Saver Invisible Paving Impregnator and Anti Chewing Gum Solution

The Ultimate in Pavement Surface Protection, Stone Protection and Floor Protection Makes Removing Chewing Gum Easy!

Pave-Saver protects surfaces from the menace of discarded chewing gum and helps them remain clean by repelling water, airborne dirt, acid rain, smog, industrial pollutants, oil and grease, dust and organic growth (lichens & moss).

Due to its exceptional penetration and stain repellent properties, Pave-Saver Paving Impregnator, supplied by Go-Gum Limited, is ideally suited to the protection of a wide variety of outdoor and indoor masonry surfaces that are subjected to heavy foot traffic.

Pave-Saver protects substrates and makes removing chewing gum and pollution effortless! Rain water can remove soiling as the particles are prevented from sticking to the substrate. Pave-Saver offers this high level of protection by effectively reducing the adhesion rate of the pollutant, whilst still enabling the underlying materials to breathe. Once treated, pressure washing/steam cleaning with the Enviraclean Machine/Gum-Grafter (or similar) may be required periodically.

Pave-Saver also prevents surface spalling and fragmentation through repeated freeze/thaw cycles. Once applied it is invisible, essentially forming part of the substrates fabric and therefore offering high resistance to abrasion.

Pave-Saver Ultra

Pave-Saver Ultra has been developed to protect areas subjected to ultra high foot traffic. Typical areas of use include railway and tube stations, outside pubs and night spots, around bus stops and litter bins – practically any ultra high traffic area which requires protection!. For Pave-Saver Ultra prices, please email us at for a written quotation.

How Pave-Saver Protects

Pave-Saver is not a coating, and therefore does not suffer from failure due to adhesion issues.

Pave-Saver Invisible Chewing Gum and Stain Repellent

Pave-Saver treatment is achieved by impregnation to the point of saturation so that Pave-Saver gets deep into a material’s pores, thus making it water repellent. In preventing the ingress of water, Pave-Saver removes the damaging effects of both frost and humidity.

Pave-Saver Paving Impregnator Application Video

REACH Compliance

All the raw materials used in the Pave-Saver and Pave-Saver Ultra formulation are REACH compliant.
(REACH is the European Unions: Registration, Evaluation, and Authorisation, of Chemicals.)

Application Guide

Surface to be treated must be free from chewing gum, dust, dirt, oil, efflorescence, mould/algae, old paint, other surface contaminants.

Clean surface thoroughly using a hot wash/pressure washer (Go-Gum Enviraclean Machine or similar) prior to application. The substrate should be dry, with surface and ambient temperatures between 5°C and 35°C.

Pave-Saver pavement surface protection can be applied by brush, roller, squeegee, back pack sprayer or low pressure spray. If using a back pack sprayer or low pressure spray unit, care must be taken to avoid the formation of fine spray or mists. As with all water based products, mists or spray should not be breathed. Product must always be applied as a liquid only.

Surface to be treated must be fully saturated. This will require between 1 and 3 coats applied wet on wet dependent on substrate porosity (see guide).

We Can Also Apply Pave-Saver For You!

Surface Solve Ltd, part of the Go-Gum Group, offer a complete range of services from site surveys, removing chewing gum and pavement cleansing, right through to the application of our unique anti chewing gum and stain repellent, Pave-Saver.

Product Demonstration

Should you require a demonstration of Pave-Saver please contact us on 020 7566 3988. We are happy to visit you at an agreed location in order to demonstrate the unique cleaning and protection solutions offered by Go-Gum limited.

Pave-Saver International Distributors

Go-Gum Limited (UK) are actively seeking overseas distributors and agents for the unique, environmentally friendly ‘Pave-Saver’ anti chewing gum and stain repellent. In our ongoing commitment to grow our business, we are now looking for additional distributors and agents in:

  • The Americas
  • Europe
  • Middle East
  • India
  • Africa
  • Asia Pacific

Prospective partners should have strong connections in the following market sectors:

  • Highways and Maintenance
  • Facilities Management
  • Environmental Services
  • Street Cleansing

If you would like to join us, please contact Managing Director, Rob Dixon at

Buy Go-Gum Pave-Saver

Go-Gum Pave-Saver can be purchased from our online shop.Go-Gum Pave-Saver Ultra cannot be purchased from our online shop at this time. If you would like to place an order for Pave-Saver Ultra, please contact us directly via email or telephone us on 0207 566 3988.

Pave-Saver Product Details

Technical Specifications

Appearance: Liquid
Colour: Amber
Odour: Very Subtle
Active: Agents
pH value: 5-6
Boiling Point [°C]: 100
Density: 1.01
Flash point [°C]: Not applicable
Solubility in water [°C]: Totally miscible

Product Description

A water based fluorochemical dispersion.

Areas of Use

Pave-Saver can be applied to pavements, pedestrian areas, forecourts, car parks, roofs, terraces, floors, stairs – practically any high traffic masonry or pavement area which requires protection!

Consumption Rate Guide*

Paving Stones: 5 m2/L
Concrete: 5 m2/L
Brick: 3 m2/L
Block Paving: 5-9 m2/L
Sandstone: 1-5 m2/L
Granite: 5-26 m2/L
Marble: 16 m2/L
Limestone: 1-5 m2/L
Terracotta: 5 m2/L
Roof Tiles: 5-10 m2/L
Slate: 8 m2/L
*Approximate values. Test areas should always be undertaken to establish site specific consumption rates.