The anti-graffiti coating that gives your walls and surfaces over 20 years protection!
Anti-graffiti and damage prevention. Everything is protected for years!
Cleaning up your environment and then keeping it clean has never been so easy.
Just one coat of easy-on™ protective coating applied to any type of surface will enable the swift removal of any subsequent graffiti.
easy-on™ not only protects surfaces from graffiti but also from scuffing, traffic film, UV degredation, grime and stains. It is a permanent coating, proven to withstand 100s of cleaning cycles without leaving unsightly shadows or stains.
The clear, durable finish encapsulates any surface to allow easy cleaning and it's hard-wearing good looks last for over 20 years. easy-on is ideal for all surfaces - internally or externally - and complies with all building regulations.
So if your walls are taking some stick, look for the easy-to-clean, permanent solution - easy-on.
Buy easy-on Online
Standard Shipping Rate (per order): £8.50
Standard shipping rates apply to mainland UK only.
Surfaces for Treatment
easy-on is suitable to use indoors or outdoors and is ideal for high traffic areas giving proven protection against stains and damage. easy-on can be applied to any surface with the most common surfaces requiring treatment include brick, concrete, tile, paint, metal, stone, plaster, timber, walls, doors, ceilings and Multi-Fleks.
Areas of Use
easy-on, easy-off and easy-guard are already in use on many buildings, structures and public transport systems throughout the UK and Europe, and are now widely regarded as the best coatings of their types available.
Subways
Toilets
Hotels
Schools
Colleges
Universities
Offices
Prisons
Shopping Malls
Pubs
Clubs
Factories
Restaurants
Supermarkets
Hospitals
Monuments
Play Equipment
Shops
Utility Supply Industries
Catering Establishments
Tunnels
Airports
Stations
Bus Depots
Building Facades
Bridges
Vehicles
Statues
Street Furniture
Rolling Stock
Industrial Equipment
Highways
Housing
The Benefits are Clear
Can be applied to any surface
Permanent protection
Makes cleaning easy
Withstand 100's of cleaning cycles
Resists all graffiti media
Class '0' Fire Rating
UV resistant
Protects painted and unpainted surfaces
Incredibly tough, withstands knocks and bangs
Internal or external use
Complies to all building regulations
Solvent free
Low VOC
Brush, roller or spray application
Protects for over 20 years
Rapid curing in around 4 hours
Dries to form a seamless, hygienic, wipe clean barrier
Single coat application
Application Guide
So easy and safe to use.
Coating performance is proportional to the degree of surface preparation. Surface must be clean, dry (6% moisture), undamaged and free of all contaminants prior to coating.
Prepare damaged areas to original surface preparation specifications, feathering edges of any intact coating system.
For optimum application, temperature of the material should be between 10°C and 20°C prior to mix and application.
Gradually add total contents of Cure tin into Resin tin and stir thoroughly to a uniform consistency.
Apply by brush, small roller or spray, without thinning.
Use a cross-lapping method of application ensuring corners and edges are covered and avoid misses. If the surface is highly porous do not attempt to cover with one application. Apply a thin coat, leave for 3 - 4 hours to partially reduce porosity, and then apply a second light and even coat.
Required Treatment
Stainless Steel: Abrade, sweep blast or high pressure water blast.
Aluminium: Degrease followed by abrading blast or chemical conversion treatment.
Galvanizing: Degrease followed by abrading or chemical conversion treatment.
Concrete: New concrete - Acid etch or abrade to remove laitence. Aged concrete must be thoroughly cleaned.
Aged Coatings: All surfaces must be clean & dry, tightly bonded and free of loose flakes and corrosion products.
Brick/stone: All surfaces must be clean and dry and free of loose material.
Timber etc: Ensure surfaces are clean and dry.
Easy On Price List
Product
Tin Size
Coverage*
Cost/m²
easy-on Protective Coating
4.50 litre
158m²
£1.01
easy-on Protective Coating
2.25 litre
79m²
£1.08
easy-on's clear durable finish encapsulates any surface to allow easy cleaning using the mildest, safest of cleaning products. easy-off comes complete with everything you need to remove graffiti safely in a handy kit already used by community groups, caretakers and clean up crews.
Buy easy-on Online
Standard Shipping Rate (per order): £8.50
Standard shipping rates apply to mainland UK only.
Product Demonstration
Should you require a no obligation demonstration of the easy-on™ permanent protective coating please contact us on 020 7566 3988. We are happy to visit you at your place of work or an agreed location in order to demonstrate the unique cleaning and protection solutions offered by Go-Gum limited.
