Introducing the Gum-Grafter
A completely self-contained chewing gum removal system! The Gum-Grafter incorporates a 6.5 bar pressure steam boiler with an integral chemical delivery system. Made from a highly durable stainless steel construction with a continuous fill boiler, the Gum-Grafter is ideally suited for large areas of chewing gum removal. The system comes complete with trolley and trolley mounted generator and is supplied with a full set of tools and accessories.
The steam cleaning process for removing chewing gum has never been easier! By simply combining a safe, environmentally friendly cleaning agent (RTU/CONC) with the steam, the machine removes the chewing gum effectively and efficiently, leaving only a slightly damp surface and no mess. The steam and cleaning agent reach a temperature of approximately 170°C at the cleaning head, instantly heating and breaking up gum leaving little or no trace.
Using this system to remove chewing gum is extremely cost effective. One person, using about 40 litres of water, safely stored on the trolley, is able to clean approximately 300 square metres of medium pollution in just one working day.
Surfaces for Treatment
The Gum-Grafter is ideal for high street cleaning on tarmac, flags, block paving, concrete and many more external surfaces. The system can also be utilised internally on surfaces such as vinyl, lino, quality carpets and most entrance mats.
Technical Specifications
Height: 112 cm
Length: 115 cm
Width: 52 cm
Weight: 165 kg (fully laden)
Power Supply: 110 Volt - Single Phase
Steam Pressure: 6.5 Bar
Wattage: 2200W
Boiler Capacity: 5 Litres
Continuous Fill: Yes
Reserve Tank: 10 Litres
Chemical Tank: 5 Litres
Operating Temp: 170°C
Generator: 3.5 KVA
Db: 72
Fuel Type: Unleaded Petrol
Fuel Tank Capacity: 3.6 Litres
Engine Type: 6.5 hp (Honda)
Environmental Impact
The Gum-Grafter is extremely environmentally friendly as it requires only a relatively small amount of our safe to use and fully biodegradable cleaning agent combined with water. The machine is powered by a small, fuel efficient generator and many of the components can be recycled.
Chewing Gum Remover Solution
Specially formulated to work in conjunction with the Gum-Grafter to aid chewing gum removal from most hard and soft surfaces, our non toxic, non hazardous and fully biodegradable chewing gum removal solution is safe to use on concrete, paving stones, asphalt, brick, lino, vinyl, most entrance matting and quality carpets.
C01GUM |
Chewing Gum Remover Concentrate 4x5 ltr. Easy to use by diluting at 4:1 with water. Specially formulated to work with dry steam to remove chewing gum from most hard and soft surfaces. |
£44.00 |
R01GUM |
Chewing Gum Remover Ready to Use 4x5 ltr. Easy to use. No dilution necessary just pour and go. Specially formulated to work with dry steam to remove chewing gum from most hard and soft surfaces. |
£32.00 |
Product Demonstration
Should you require a no obligation demonstration of The Gum-Grafter please contact us on 020 7566 3988. We are happy to visit you at your place of work or an agreed location in order to demonstrate the unique cleaning and protection solutions offered by Go-Gum limited.
|
