» Home
» Company
» Media Centre
» Contact
» eMail
» Links

» Enviraclean Range
» Benefits of Enviraclean
» Enviraclean in Action

» Gum-Grafter
» Grime-Grafter

» easy-on
   easy-off
 
» easy-guard

» Pave-Saver

The anti-graffiti coating that gives your walls and surfaces over 20 years protection!

Anti-graffiti and damage prevention. Everything is protected for years!

Cleaning up your environment and then keeping it clean has never been so easy.

Just one coat of easy-on™ protective coating applied to any type of surface will enable the swift removal of any subsequent graffiti.

easy-on™ not only protects surfaces from graffiti but also from scuffing, traffic film, UV degredation, grime and stains. It is a permanent coating, proven to withstand 100s of cleaning cycles without leaving unsightly shadows or stains.

The clear, durable finish encapsulates any surface to allow easy cleaning and it's hard-wearing good looks last for over 20 years. easy-on is ideal for all surfaces - internally or externally - and complies with all building regulations.

So if your walls are taking some stick, look for the easy-to-clean, permanent solution - easy-on.

Surfaces for Treatment

easy-on is suitable to use indoors or outdoors and is ideal for high traffic areas giving proven protection against stains and damage. easy-on can be applied to any surface with the most common surfaces requiring treatment include brick, concrete, tile, paint, metal, stone, plaster, timber, walls, doors, ceilings and Multi-Fleks.
 

Areas of Use

easy-on, easy-off and easy-guard are already in use on many buildings, structures and public transport systems throughout the UK and Europe, and are now widely regarded as the best coatings of their types available.

• Subways
• Toilets
• Hotels
• Schools
• Colleges
• Universities
• Offices
• Prisons
• Shopping Malls
• Pubs
• Clubs
• Factories
• Restaurants
• Supermarkets
• Hospitals
• Monuments
• Play Equipment
• Shops
• Utility Supply Industries
• Catering Establishments
• Tunnels
• Airports
• Stations
• Bus Depots
• Building Facades
• Bridges
• Vehicles
• Statues
• Street Furniture
• Rolling Stock
• Industrial Equipment
• Highways
• Housing

Application Guide

So easy and safe to use.

Coating performance is proportional to the degree of surface preparation. Surface must be clean, dry (6% moisture), undamaged and free of all contaminants prior to coating.

Prepare damaged areas to original surface preparation specifications, feathering edges of any intact coating system.

For optimum application, temperature of the material should be between 10°C and 20°C prior to mix and application.

Gradually add total contents of Cure tin into Resin tin and stir thoroughly to a uniform consistency.

Apply by brush, small roller or spray, without thinning.

Use a cross-lapping method of application ensuring corners and edges are covered and avoid misses. If the surface is highly porous do not attempt to cover with one application. Apply a thin coat, leave for 3 - 4 hours to partially reduce porosity, and then apply a second light and even coat.

Required Treatment

Stainless Steel: Abrade, sweep blast or high pressure water blast.

Aluminium: Degrease followed by abrading blast or chemical conversion treatment.

Galvanizing: Degrease followed by abrading or chemical conversion treatment.

Concrete: New concrete - Acid etch or abrade to remove laitence. Aged concrete must be thoroughly cleaned.

Aged Coatings: All surfaces must be clean & dry, tightly bonded and free of loose flakes and corrosion products.

Brick/stone: All surfaces must be clean and dry and free of loose material.

Timber etc: Ensure surfaces are clean and dry.

Easy On Price List

easy-on's clear durable finish encapsulates any surface to allow easy cleaning using the mildest, safest of cleaning products. easy-off comes complete with everything you need to remove graffiti safely in a handy kit already used by community groups, caretakers and clean up crews.

Product Demonstration

Should you require a no obligation demonstration of the easy-on™ permanent protective coating please contact us on 020 7566 3988. We are happy to visit you at your place of work or an agreed location in order to demonstrate the unique cleaning and protection solutions offered by Go-Gum limited.